Mokka

6 products
OPEL 30MM LOWERING SPRING KIT MOKKA/MOKKA X SUV YEARS 06/2012-
OPEL 30MM LOWERING SPRING KIT MOKKA/MOKKA X SUV YEARS 06/2012-
€ 282.10
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: OPEL, MOKKA/MOKKA X, Lowered Spring Kit Approximate lowering - 30mm front and 35mm rear Fits Engines: 1.6CDTi/1.7CDTi 4X4 Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
OPEL 30MM LOWERING SPRING KIT MOKKA/MOKKA X SUV YEARS 06/2012-
OPEL 30MM LOWERING SPRING KIT MOKKA/MOKKA X SUV YEARS 06/2012-
€ 276.90
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: OPEL, MOKKA/MOKKA X, Lowered Spring Kit Approximate lowering - 30mm front and 35mm rear Fits Engines: 1.4T 4X4 Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
OPEL 30MM LOWERING SPRING KIT MOKKA/MOKKA X SUV YEARS 06/2012-
OPEL 30MM LOWERING SPRING KIT MOKKA/MOKKA X SUV YEARS 06/2012-
€ 276.90
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: OPEL, MOKKA/MOKKA X, Lowered Spring Kit Approximate lowering - 30mm front and 35mm rear Fits Engines: 1.4T 4X4 Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
LK Performance RDX Roof Spoiler OPEL Mokka & Mokka X - LK Auto Factors LK Performance RDX Roof Spoiler OPEL Mokka & Mokka X - LK Auto Factors
LK Performance RDX Roof Spoiler OPEL Mokka & Mokka X
€ 139.00
LK Performance RDX Roof Spoiler OPEL Mokka & Mokka XMade from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X OPEL Mokka X Front Lip Splitter - LK Auto Factors LK Performance RDX Front Spoiler VARIO-X OPEL Mokka X Front Lip Splitter - LK Auto Factors
LK Performance RDX Front Spoiler VARIO-X OPEL Mokka X Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X OPEL Mokka X Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X OPEL Mokka Front Lip Splitter - LK Auto Factors LK Performance RDX Front Spoiler VARIO-X OPEL Mokka Front Lip Splitter - LK Auto Factors
LK Performance RDX Front Spoiler VARIO-X OPEL Mokka Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X OPEL Mokka Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
FOLLOW US