A4-B9
LK Performance side skirts AUDI A4 8W B9 "Edition"
€ 164.00
RDX side skirts AUDI A4 8W B9 "Edition"
Scope of delivery:> Side skirts set (left and right)> Mounting accessories> TÜV approval , 100% registration free!> Installation instructionsSuitable for:> Allarticle and quality features : > Perfectfit. Easy installation> unpainted. Paint-friendly, cleanly processed surface> Made from high-quality original equipment material ABS plastic . Flexible, unbreakable and shatterproof> Tip: The integrated lower lip can be painted in car or contrasting color.
LK Performance Rear Diffusor U-Diff XL (wide version) Universal A4-B9
€ 117.00
LK Performance Rear Diffusor U-Diff XL (wide version) Universal
U-Diff XL universal rear diffusor by LK Performance:
Stylish 1-piece rear diffusor
OEM-Material PUR-Plastic
Quality-product, Made in Germany
TÜV approval inclusive
Easy installation by screws with the included mounting kit
Delivery content: > U-Diff XL rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff XL article- und quality features:The U-Diff XL is a universally usable rear diffusor by LK Performance, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff XL rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff XL rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff XL rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff XL rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff XL rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff XL rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-Diff XL rear diffusor is 71.5 cm. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff XL rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff XL rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.
LK Performance Rear Diffusor U-Diff Universal A4-B9
€ 117.00
LK Performance Rear Diffusor U-Diff Universal
U-Diff universal rear diffusor by LK Performance:
Stylish 1-piece rear diffusor
OEM-Material PUR-Plastic
Quality-product, Made in Germany
TÜV approval inclusive
Easy installation by screws with the included mounting kit
Delivery content: > U-Diff rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff article- und quality features:The U-Diff is a universally usable rear diffusor by LK Performance, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-diff rear diffusor is 52.5 cm. This corresponds approximately to the level of a normal-euro plate. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.
LK Performance Universal Wheel Arches FENDER-X A4-B9
€ 82.00
LK Performance Universal Wheel Arches FENDER-X
LK Performance Universal Wheel Arches FENDER-X•\\\\\\\\tSet consists of 4 pieces•\\\\\\\\tLength 150cm each wheel arche. Can be individually cut to size•\\\\\\\\tHighly flexible and 3D glueable•\\\\\\\\tUniversally usable for all vehicles (cars, trucks, etc.)•\\\\\\\\tTÜV approval inclusive•\\\\\\\\tWith already applied, high tack adhesive tape as assembling aid•\\\\\\\\tGreat appearance and improved wheel coveringDelivery content•\\\\\\\\t4x Wheel arches•\\\\\\\\tAdhesive tape (already applied)•\\\\\\\\tTÜV approval•\\\\\\\\tInstallation instruction (integrated in TÜV approval)FENDER-X article- und quality featuresThe universal wheel arches FENDER-X are an innovative quality product by LK Performance. This stylish wheel arches are made of high flexible PUR plastic. Thanks to the high-quality surface, the FENDER-X wheel arches can be mounted in delivery condition (plastic black matt) to the vehicle. The wheel arches FENDER-X are also suitable for painting and foliation.The installation of the wheel arches FENDER-X is extremely simple and can be made at any time without prior knowledge. The installation must be in heated condition, as the wheel arches FENDER-X get highly flexible and can simply be glued with the already applied 3M-adhesive tape to the wheel arche on the vehicle. Finally, a body adhesive (not included in the delivery content) should be applied from the inside (a blob), especially at the ends of the FENDER-X wheel arches to ensure long-lasting hold.The universal wheel arches FENDER-X will be delivered with a TÜV approval.
LK Performance Universal Spoiler lip SAFE `N STYLE A4-B9
€ 39.00
LK Performance Universal Spoiler lip SAFE `N STYLE
LK Performance Universal Spoiler lip SAFE `N STYLE
Length 250cm, can be individually cut to size
Highly flexible and 3D glueable
Universally usable for all vehicles (Cars, trucks, scooters, etc.)
TÜV approval inclusive
Can be used as a front spoiler lip at the front, side skirts at the side, rear apron at the rear and much more
With already applied, high tack adhesive tape as assembling aid
Great appearance and protection effect at the same time. If you hit the ground the spoiler lip protects painted bumpers / spoilers against scratches and is also sporty, great looking!
Delivery content > Spoiler lip (250cm) > Adhesive Tape (already applied) > TÜV approval > Installation instruction (integrated in TÜV approval) SAFE `N STYLE article- und quality features The universal spoiler lip SAFE `N STYLE is an innovative quality product by LK Performance. This stylish spoiler lip is made of highly flexible PP-EPDM plastic with rubber-/flexible foam properties. The universal spoiler lip SAFE `N STYLE is user-ready, finished in black, thus there are no additional costs for painting. The spoiler lip is not suitable for painting and foliation. The installation of the the universal spoiler lip SAFE `N STYLE is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible as rubber, 3D glueable and will be simply glued from below to the desired location on the vehicle. With already applied, high tack adhesive tape as assembling aid. To ensure long-lasting hold, screws, body adhesive or rivets are supplementary to install. The design of the vehicle remains unrestricted. The universal spoiler lip SAFE `N STYLE gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 1cm in depth on. How much the spoiler lip sticks out on the outside can be determined by yourself in adhering the spoiler lip less or more overlapping. The universal spoiler lip SAFE `N STYLE can be installed up to 4 cm to the outside. Of course, the spoiler can also be mounted invisibly, without standing out. In this case, the universal spoiler lip SAFE \\\\\\\\\\\\\\\\´N STYLE is for protection of the vehicle or vehicle parts. The universal spoiler lip SAFE `N STYLE will be delivered with a TÜV approval.
LK Performance Universal Spoiler lip CUP2.0 Front Splitter A4-B9
€ 139.00
LK Performance Universal Spoiler lip CUP2.0 Front Splitter
LK Performance Universal Spoiler lip CUP2.0
Simple installation with included Rivets
Highly flexible black PUR-plastic (PUR-RIM)
Universally usable for a huge range of cars
Delivery content > Spoiler lip > Rivets > ABE / Approval > Installation instruction (integrated in ABE / Approval) CUP2.0 article- und quality features The universal spoiler lip CUP2.0 is an innovative quality product by LK Performance, Made in Germany. This stylish spoiler lip is made of highly flexible PUR-plastic (PUR-RIM) with high flexible properties. The universal spoiler lip CUP2.0 is user-ready in black, thus there are no additional costs for painting. The spoiler lip is suitable for painting. The installation of the the universal spoiler lip CUP2.0 is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible and will be installed with rivets from below to the desired location on the vehicle. The design of the vehicle remains unrestricted. The universal spoiler lip CUP2.0 gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 3,5cm in depth on. The universal spoiler lip CUP2.0 will be delivered with a ABE Approval for more than 200 car models.
LK Performance front spoiler VARIO-X AUDI RS4 B9 front lip front attachment
€ 199.00
RDX front spoiler VARIO-X AUDI RS4 B9 front lip front attachment front spoiler lip
VARIO-X by RDX:
Innovative 3-part front spoiler
3-part production. 1-piece, precisely fitting and ready-to-install delivery
Original equipment material PUR plastic
Quality product, Made in Germany
ABE and mounting kit included
Simple screw assembly without gluing
Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes
Scope of delivery:> Front spoiler VARIO-X> ABE (registration free)>Mounting accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.
LK Performance side skirts AUDI A4 8W B9 "Slim"
€ 152.00
RDX side skirts AUDI A4 8W B9 "Slim
Scope of delivery:> Side skirts set (left / right)> Mounting accessories> TÜV approval , 100% registration free!> Installation instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, simple installation> Ready-to-install surface in high-gloss black. Does not have to be painted (but can of course)> Made of high quality original equipment material ABS plastic. Flexible, break and shatterproof. Installation information:> Simple adhesive assembly with the included mounting accessories.
LK Performance front spoiler VARIO-X AUDI A4 8W B9 (S-Line or S4 front bumper)
€ 176.00
RDX front spoiler VARIO-X AUDI A4 8W B9 (S-Line or S4 front bumper) Front lip Front attachment Front spoiler lip
VARIO-X by RDX:
Innovative 3-part front spoiler
3-part production. 1-piece, custom-fit and ready-to-install delivery
Original equipment material PUR plastic
Quality product, Made in Germany
ABE and mounting kit included
Simple screw assembly without gluing
Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes
Scope of delivery:> Front spoiler VARIO-X> ABE (registration free)>Mounting accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.
LK Performance ront spoiler VARIO-X AUDI A4 8W B9 front lip front attachment
€ 176.00
RDX front spoiler VARIO-X AUDI A4 8W B9 front lip front attachment front spoiler lip
VARIO-X by RDX:
Innovative 3-part front spoiler
3-part production. 1-piece, custom-fit and ready-to-install delivery
Original equipment material PUR plastic
Quality product, Made in Germany
ABE and mounting kit included
Simple screw assembly without gluing
Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes
Scope of delivery:> Front spoiler VARIO-X> ABE (registration free)>Mounting accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.