NEW For Winter 6500K Cool White LED Car Headlight Bulbs H7 (Twin) CSP LED Chips Our new LED Collection implements specially selected diodes and OSRAM Opto Semiconductors which allows each bulb to achieve a striking light output up to 300% brighter than standard, with a highly stylish colour temperature of up to 6500K. This high Kelvin rating offers a modish, cool white light colour so you can drive in style in addition its massive light output allows for added safety and comfort on the road. Being up to 300% brighter than standard, our new H7 cool white light not only enhances your vision, but also heightens your visibility to other drivers, protecting you and them. Utilising a copper heat conductor and microprocessor the bulbs are able to safely dissipate heat while effectively maintaining voltage control, meaning that you can expect thousands of hours of efficiently produced, strong LED light from your bulbs. Remarkably the new H7 Led is self-regulating in terms of its power consumption, eliminating the bulbs’ risk of incompatibility with a vehicle’s electric wiring system. So you don’t have to worry about flickering lights or bulb error warnings on the dashboard – the bane of many LED upgrades. And with a simple, compact design and clear-to-follow instructions included, installation is a breeze. Features and Benefits 6500K colour temperature 12000 lumens 80w (40watt per bulb) Stylish cool white light  – close daylight colour match Up to 300% more light provided than standard Heat-management components to ensure longevity Very long lifespan Consistently diffused LED projection Easy installation – instructions included No need for additional installation of CAN bus control unit / adapter  4 CSP Led Chips 360° Super Bright Lighting Plug-N-Play (EMC-ready): - No error and flash problem (For 90% of vehicle) - Sized to perfectly fit your stock headlights and plug directly into your sockets. - EMC-ready,No Radio interference - 0.1 second 100% light-up Easy Installation: - All-in-one aluminium material and design makes it easy to install.   Plug-and-Play direct replacement in 20 mins.  PLEASE NOTE THAT IF YOU ARE UNSURE AS TO WHETHER THESE OR ANY OTHER LED BULBS WILL FIT YOUR VEHICLE PLEASE CONTACT ONE OF OUR HELPFUL STAFF ON ++353 74 9111000

NEW For Winter 6500K Cool White LED Car Headlight Bulbs H11 / H8 (Twin) CSP LED Chips Our new LED Collection implements specially selected diodes and OSRAM Opto Semiconductors which allows each bulb to achieve a striking light output up to 300% brighter than standard, with a highly stylish colour temperature of up to 6500K. This high Kelvin rating offers a modish, cool white light colour so you can drive in style in addition its massive light output allows for added safety and comfort on the road. Being up to 300% brighter than standard, our new H11 / H8 cool white light not only enhances your vision, but also heightens your visibility to other drivers, protecting you and them. Utilising a copper heat conductor and microprocessor the bulbs are able to safely dissipate heat while effectively maintaining voltage control, meaning that you can expect thousands of hours of efficiently produced, strong LED light from your bulbs. Remarkably the new H11 / H8 Led is self-regulating in terms of its power consumption, eliminating the bulbs’ risk of incompatibility with a vehicle’s electric wiring system. So you don’t have to worry about flickering lights or bulb error warnings on the dashboard – the bane of many LED upgrades. And with a simple, compact design and clear-to-follow instructions included, installation is a breeze. Features and Benefits 6500K colour temperature 12000 lumens 80w (40watt per bulb) Stylish cool white light  – close daylight colour match Up to 300% more light provided than standard Heat-management components to ensure longevity Very long lifespan Consistently diffused LED projection Easy installation – instructions included No need for additional installation of CAN bus control unit / adapter  4 CSP Led Chips 360° Super Bright Lighting Plug-N-Play (EMC-ready): - No error and flash problem (For 90% of vehicles) - Sized to perfectly fit your stock headlights and plug directly into your sockets. - EMC-ready,No Radio interference - 0.1 second 100% light-up Easy Installation: - All-in-one aluminium material and design makes it easy to install.   Plug-and-Play direct replacement in 20 mins.  PLEASE NOTE THAT IF YOU ARE UNSURE AS TO WHETHER THESE OR ANY OTHER LED BULBS WILL FIT YOUR VEHICLE PLEASE CONTACT ONE OF OUR HELPFUL STAFF ON ++353 74 9111000

New 2021 LK Performance Roof Mounted Amber Strobe Recovery Light Bar Warning Beacon 12/24V- 7 different modes of flashing- 360 Degrees light output (legal requirement) - Clear lens when off, 76 Amber LEDs when switched on- Built-in memory which recalls last pattern selected- Mounted with magnets, attach to any metal roof (tested to 100KPH)- Directly plug it into 12/24V car cigarette adapter- Up to 40,000 hours life- 76 high intensity LEDs-Anti-dust, anti-collision, anti splash wet, reliable and safe ( Water resistant but cannot be submerged in water )– Heat sink on base with rubber feet to stop magnetic from scripting the paint workModes:Mode 1: Flashes clockwiseMode 2: Flashes counter clockwiseMode 3: Alternates between front and back sideMode 4: Alternates between left and right sideMode 5: Strobes all lights at uniform speedMode 6: Strobes all lights at high speedMode 7: Turns on all the LEDsFitment:All vehicles equiped with a 12/24 volt DC cigarette adapter.Dimension: (13''/inch) x 16cm(6.2''/inch) x 6cm(2.4''/inch)Light-emitting Modes: 7 flash patterns

NEW For Winter 6500K Cool White LED Car Headlight Bulbs H1 (Twin) CSP LED Chips Our new LED Collection implements specially selected diodes and OSRAM Opto Semiconductors which allows each bulb to achieve a striking light output up to 300% brighter than standard, with a highly stylish colour temperature of up to 6500K. This high Kelvin rating H1 LED offers a modish, cool white light colour so you can drive in style in addition its massive light output allows for added safety and comfort on the road. Being up to 300% brighter than standard, our new H1 cool white light not only enhances your vision, but also heightens your visibility to other drivers, protecting you and them. Utilising a copper heat conductor and microprocessor the bulbs are able to safely dissipate heat while effectively maintaining voltage control, meaning that you can expect thousands of hours of efficiently produced, strong LED light from your bulbs. Remarkably the new H1 Led is self-regulating in terms of its power consumption, eliminating the bulbs’ risk of incompatibility with a vehicle’s electric wiring system. So you don’t have to worry about flickering lights or bulb error warnings on the dashboard – the bane of many LED upgrades. And with a simple, compact design and clear-to-follow instructions included, installation is a breeze. Features and Benefits 6500K colour temperature 12000 lumens 80w (40watt per bulb) Stylish cool white light  – close daylight colour match Up to 300% more light provided than standard Heat-management components to ensure longevity Very long lifespan Consistently diffused LED projection Easy installation – instructions included No need for additional installation of CAN bus control unit / adapter  4 CSP Led Chips 360° Super Bright Lighting Plug-N-Play (EMC-ready): - No error and flash problem (For 90% of vehicle) - Sized to perfectly fit your stock headlights and plug directly into your sockets. - EMC-ready,No Radio interference - 0.1 second 100% light-up Easy Installation: - All-in-one aluminium material and design makes it easy to install.   Plug-and-Play direct replacement in 20 mins.  PLEASE NOTE THAT IF YOU ARE UNSURE AS TO WHETHER THESE OR ANY OTHER LED BULBS WILL FIT YOUR VEHICLE PLEASE CONTACT ONE OF OUR HELPFUL STAFF ON ++353 74 9111000

LK Performance RDX Front Spoiler VARIO-X TOYOTA Auris E150 (-2010) Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

LK Performance RDX Roof Spoiler TOYOTA AurisMade from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all modelsABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

LK Performance RDX Trunk lid spoiler MERCEDES C-Class W204Made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

LK Performance RDX Rear Window Spoiler Lip MERCEDES C-Class W204Made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.