RDX Race Design Body Kits
LK Performance RDX Front Spoiler VARIO-X TOYOTA Auris E150 (-2010) Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X TOYOTA Auris E150 (-2010) Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X TOYOTA Corolla E12 TS (2004-2007) Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X TOYOTA Corolla E12 TS (2004-2007) Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler TOYOTA Corolla E12
€ 149.00
LK Performance RDX Roof Spoiler TOYOTA Corolla E12Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models, excepting Station Wagon and sedanABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler TOYOTA Auris
€ 149.00
LK Performance RDX Roof Spoiler TOYOTA AurisMade from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all modelsABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Trunk lid spoiler MERCEDES C-Class W204
€ 31.90
LK Performance RDX Trunk lid spoiler MERCEDES C-Class W204Made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Rear Window Spoiler Lip MERCEDES C-Class W204
€ 31.90
LK Performance RDX Rear Window Spoiler Lip MERCEDES C-Class W204Made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Rear Spoiler MAZDA MX5 (NC) 2005-2015 Rear Wing
€ 117.00
LK Performance RDX Rear Spoiler MAZDA MX5 (NC) 2005-2015 Rear WingMade from PUR-IHS plastic, new, unpainted, including installation accessories (adhesive glue) and instruction, TÜV approval. Fits all models.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X BMW Z4 E85, E86 2006+ Front Lip Splitter
€ 176.00
LK Performance RDX Front Spoiler VARIO-X BMW Z4 E85, E86 2006+ Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X BMW 1-series F20 / F21 2011-2015 Front Lip Splitter
€ 176.00
LK Performance RDX Front Spoiler VARIO-X BMW 1-series F20 / F21 2011-2015 Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler BMW 1-series E81 / E87
€ 117.00
LK Performance RDX Roof Spoiler BMW 1-series E81 / E87Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all modelsABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X FORD Focus 3 ST-Line 2015+ Front Lip Splitter
€ 176.00
LK Performance RDX Front Spoiler VARIO-X FORD Focus 3 ST-Line 2015+ Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Frontspoiler FORD Focus 3
€ 152.00
LK Performance RDX Frontspoiler FORD Focus 3Made from GFK plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models, excepting ST/RSABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X TOYOTA Avensis T27 2015+ Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X TOYOTA Avensis T27 2015+ Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X RENAULT Clio 3 Phase 1 (not RS) Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X RENAULT Clio 3 Phase 1 (not RS) Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler PEUGEOT 207 (3-doors)
€ 99.00
LK Performance RDX Roof Spoiler PEUGEOT 207 (3-doors)Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits 3-doorABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler OPEL Astra J
€ 152.00
LK Performance RDX Roof Spoiler OPEL Astra JMade from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all 5-door models, excepting SportsTourer/StationWagonABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.