2

20 products
MAZDA 25MM LOWERING SPRING KIT RX8 COUPE YEARS 2003-06/2012
MAZDA 25MM LOWERING SPRING KIT RX8 COUPE YEARS 2003-06/2012
€ 211.90
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: MAZDA, RX8, Lowered Spring Kit Approximate lowering - 25mm front and 25mm rear Fits Engines : 2.6 (141/170 KW) Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
MAZDA 25MM LOWERING SPRING KIT 3 HATCHBACK+SEDAN YEARS 11/2018-
MAZDA 25MM LOWERING SPRING KIT 3 HATCHBACK+SEDAN YEARS 11/2018-
€ 228.80
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: MAZDA, 3, Lowered Spring Kit Approximate lowering - 25mm front and 30mm rear Fits Engines : 1.8D AUTOMATIC GEAR/2.0(180PK) Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
MAZDA 25MM LOWERING SPRING KIT 3 HATCHBACK+SEDAN YEARS 11/2018-
MAZDA 25MM LOWERING SPRING KIT 3 HATCHBACK+SEDAN YEARS 11/2018-
€ 228.80
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: MAZDA, 3, Lowered Spring Kit Approximate lowering - 25mm front and 30mm rear Fits Engines : 1.8D AUTOMATIC GEAR/2.0(180PK) Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
MAZDA 25MM LOWERING SPRING KIT 3 HATCHBACK+SEDAN YEARS 11/2018-
MAZDA 25MM LOWERING SPRING KIT 3 HATCHBACK+SEDAN YEARS 11/2018-
€ 228.80
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: MAZDA, 3, Lowered Spring Kit Approximate lowering - 25mm front and 30mm rear Fits Engines : 1.8D MANUAL GEAR/2.0(122PK) Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
MAZDA 25MM LOWERING SPRING KIT 2 HATCHBACK YEARS 11/2014-
MAZDA 25MM LOWERING SPRING KIT 2 HATCHBACK YEARS 11/2014-
€ 198.90
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: MAZDA, 2, Lowered Spring Kit Approximate lowering - 25mm front and 35mm rear Fits Engines : 1.5D Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
MAZDA 25MM LOWERING SPRING KIT 2 HATCHBACK YEARS 11/2014-
MAZDA 25MM LOWERING SPRING KIT 2 HATCHBACK YEARS 11/2014-
€ 192.40
Suspension is one of the most important factors in determining your vehicle’s day-to-day drivability. The first step in suspension tuning is to upgrade your vehicle’s stock springs. Upgrading your suspension components will ensure that your vehicle has improved handling and reduced body roll. Our New Specially designed Lowering Springs have superb ride comfort and increased driving convenience. Our LK Performance Springs are high quality products—they will not set or sag, they are designed and manufactured to be strong, resilient, and more durable than other automotive coil springs. All our lowering springs springs are crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance. Our Lowering Springs are shot-peened to increase their life by more than 200%. All production is completed in-house so product quality is ensured. Each spring is 100% tested before leaving the ISO9001 certified production facility in Germany. Features: MAZDA, 2, Lowered Spring Kit Approximate lowering - 25mm front and 35mm rear Fits Engines : 1.5 Our lowering spring kits are approximately 22% stiffer than standard springs. The springs are progressively wound, which retains a good degree of ride comfort. They will work with standard shock absorbers as long as the shocks are in good condition. Please contact us if you need advise. A complete set of 4 uprated and lowered springs
LK Performance RDX Roof Spoiler MAZDA 2 (DJ) 2014-2020 & 2020+ Rear Wing LK Performance RDX Roof Spoiler MAZDA 2 (DJ) 2014-2020 & 2020+ Rear Wing
LK Performance RDX Roof Spoiler MAZDA 2 (DJ) 2014-2020 & 2020+ Rear Wing
€ 152.00
RDX Roof Spoiler MAZDA 2 (DJ) 2014-2020 & 2020+ Rear Wing Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler MAZDA 2 (DE) 2007-2014 Rear Wing LK Performance RDX Roof Spoiler MAZDA 2 (DE) 2007-2014 Rear Wing
LK Performance RDX Roof Spoiler MAZDA 2 (DE) 2007-2014 Rear Wing
€ 152.00
RDX Roof Spoiler MAZDA 2 (DE) 2007-2014 Rear Wing Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Frontspoiler VARIO-X MAZDA 2 (DE) 2007-2010 Frontlippe Front Ansatz Vorne Spoilerlippe LK Performance RDX Frontspoiler VARIO-X MAZDA 2 (DE) 2007-2010 Frontlippe Front Ansatz Vorne Spoilerlippe
LK Performance RDX Frontspoiler VARIO-X MAZDA 2 (DE) 2007-2010 Frontlippe Front Ansatz Vorne Spoilerlippe
€ 176.00
RDX Front Spoiler VARIO-X MAZDA 2 (DE) 2007-2010 Front Lip Splitter VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting Instructions VARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DJ) 2014-2020 Front Lip Splitter LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DJ) 2014-2020 Front Lip Splitter
LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DJ) 2014-2020 Front Lip Splitter
€ 176.00
RDX Front Spoiler VARIO-X MAZDA 2 (DJ) 2014-2020 Front Lip Splitter VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting Instructions VARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Sideskirts MAZDA 2 (DE) 2007-2014 LK Performance RDX Sideskirts MAZDA 2 (DE) 2007-2014
LK Performance RDX Sideskirts MAZDA 2 (DE) 2007-2014 "Slim"
€ 152.00
RDX Sideskirts MAZDA 2 (DE) 2007-2014 "Slim" Made from ABS plastic, new, black highgloss. Including TÜV approval and installation accessories. Fits all models 2/3- and 4/5-door. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007 LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007
LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007 "Edition"
€ 164.00
RDX Sideskirts MAZDA 2 (DY) 2003-2007 "Edition" Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All models 2/3- and 4/5-doorArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Sideskirts MAZDA 2 (DE) 2007-2014 LK Performance RDX Sideskirts MAZDA 2 (DE) 2007-2014
LK Performance RDX Sideskirts MAZDA 2 (DE) 2007-2014 "Edition" MAZDA 2
€ 164.00
RDX Sideskirts MAZDA 2 (DE) 2007-2014 "Edition" Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All models 2/3- and 4/5-doorArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DY) 2003-2007 Front Lip Splitter LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DY) 2003-2007 Front Lip Splitter
LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DY) 2003-2007 Front Lip Splitter
€ 176.00
LK Performance RDX Front Spoiler VARIO-X MAZDA 2 (DY) 2003-2007 Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Headlight covers MAZDA 2 2007-2011 - LK Auto Factors
LK Performance RDX Headlight covers MAZDA 2 2007-2011
€ 42.00
LK Performance RDX Headlight covers MAZDA 2 2007-2011Set for both sides, made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007 LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007
LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007 "Slim"
€ 152.00
LK Performance RDX Sideskirts MAZDA 2 (DY) 2003-2007 "Slim"Made from ABS plastic, new, black highgloss. Including TÜV approval and installation accessories. Fits all models 2/3- and 4/5-door.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
FOLLOW US