All (3618)
-50% sale
LED Conversion Kit For Quads & Motorcycles
€ 30.00
€ 60.00
No reviews
NEW For Winter 2020
Our New LED Quad & Motorcycle Conversion Kits are composed of 1 light bulb with 8 pieces CREE XLamp Siemens XB-D (5W each) high power LED chip around with full Aluminium housing and 2 CREE XLamp XB-D (5W each) LED chip with magnified projector lens on top;
The Bulb is equivilent to 55W and 2000 Lumens, much brighter than any other LED light bulb in the market.
This LED Light works properly on 98% latest/European motorcycles/cars with OBC CAN Bus wiring system (will not show Error message); if not, you may need a Load Resistor installed in the circuit.
Easy Plug & Play installation; Quick instant Start-Up time
If you are unsure if these will fit, please do contact a member of staff to advise.
LK Performance RDX Front Spoiler VARIO-X VW Golf 6 R Front Lip Splitter
€ 149.00
No reviews
RDX Front Spoiler VARIO-X VW Golf 6 R Front Lip Splitter
VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval ABE> Mounting Kit> Mounting Instructions VARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included.
ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Front Spoiler SEAT Leon 1P -2009
€ 129.00
No reviews
RDX Front Spoiler SEAT Leon 1P -2009Made from ABS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models, excepting FR / CupraABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Roof Spoiler SEAT Ibiza 6L
€ 149.00
2 reviews
RDX Roof Spoiler SEAT Ibiza 6L
Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models
ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance Sideskirts CITROEN Berlingo 2008-2018 (Type 7) / PEUGEOT Partner 2008-2018 (Type 7) "Edition"
€ 164.00
No reviews
LK Performance Sideskirts CITROEN Berlingo 2008-2018 (Type 7) / PEUGEOT Partner 2008-2018 (Type 7) "Edition"
Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All modelsArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color.
LK Performance RDX Headlight covers HYUNDAI i30 FD/FDH 2007-2012
€ 46.00
LK Performance RDX Headlight covers HYUNDAI i30 FD/FDH 2007-2012Set for both sides, made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance Front Spoiler VARIO-X VW T6 2015+ (for painted and unpainted bumper) Front Lip Splitter
€ 149.00
LK Performance RDX Front Spoiler VARIO-X VW T6 2015+ (for painted and unpainted bumper) Front Lip Splitter
VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included
LK Performance Universal Spoiler lip CUP2.0 Front Splitter
€ 34.71
RDX Universal Spoiler lip CUP2.0 Front Splitter
RDX Universal Spoiler lip CUP2.0
Simple installation with included Rivets
Highly flexible black PUR-plastic (PUR-RIM)
Universally usable for a huge range of cars
Delivery content> Spoiler lip> Rivets> ABE / Approval> Installation instruction (integrated in ABE / Approval) CUP2.0 article- und quality featuresThe universal spoiler lip CUP2.0 is an innovative quality product by RDX, Made in Germany. This stylish spoiler lip is made of highly flexible PUR-plastic (PUR-RIM) with high flexible properties. The universal spoiler lip CUP2.0 is user-ready in black, thus there are no additional costs for painting. The spoiler lip is suitable for painting.The installation of the the universal spoiler lip CUP2.0 is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible and will be installed with rivets from below to the desired location on the vehicle. The design of the vehicle remains unrestricted. The universal spoiler lip CUP2.0 gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 3,5cm in depth on.The universal spoiler lip CUP2.0 will be delivered with a ABE Approval for more than 200 car models.
BMW M Sport Performance Universal Wheel Nut Caps Covers
€ 20.00
1 review
Summary
These are M17 Wheel NUt Covers, the internal diameter of wheel nut cap is 17mm, which is suitable for most car's hexagon nuts.
These branded bolt covers not only look excellent but provide a fantastic dust proof barrier for your vehicle.
All of our wheel nut caps are made of premium plastic material, sturdy and durable and will preform for the lifespan of your wheel if looked after.
The wheel nut caps are easily installed, simply press the nut cap directly onto the bolt.
The package includes 20 pieces of wheel nut covers.
Griptor Industrial Large Disposable Glove - Pack Of 50
from € 15.00
No reviews
The Griptor Orange Semi-Disposable Nitrile Grip Gloves (Pack of 50) utilise a patented embossed "fish-scale" grip to bring you one of the most resilient and dexterous gloves available. Constructed from 100% NBR (Nitrile Butadiene Rubber), the Griptor Orange Gloves mould perfectly to your hands for maximum comfort and dexterity, and are impervious to chemicals and brake fluid.The Griptor Nitrile Grip Gloves are the best gloves for work under the bonnet..WHAT ARE THE GRIPTOR DISPOSABLE GLOVES FOR?Due to their unique grip, dexterity and resistance to a wide range of chemicals, the Griptor Disposable Gloves are constructed for use across a broad range of industries. Some industries where these gloves are recommended include:Domestic CleaningHousehold WorkEngineeringConstructionAutomotive Automotive EngineeringJanitorial WorkBuildersDevelopment SitesOil and GasMechanicsMechanical EngineeringWaste ManagementIf any industries or specific tasks aren't recommended here, don't worry – the Griptor Disposable Gloves are barriers against a broad range of chemicals and abrasions. If you require dexterous protection from a disposable glove, you've come to the right place.
Set of 4 Universal Mudflaps Splash Guard Fender Mudguard Fits Front or Rear of Altezza IS200 IS250 IS300
€ 38.99
No reviews
Set of 4 mudflaps that are universal fitment suitable for the vast majority of Lexus Altezza & Lexus Cars
Fitting front left or right, rear left or right
High quality vinyl printing, Manufactured in Ireland
These are Universal Mud Flaps and are not moulded mudflaps.
These mudflaps come complete with fitting screws
These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Lexus Altezza models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price
FULL SET OF 4 (FRONT & REAR) Sport age Ceed Performance Logo Car Mud Flap MudFlaps Fender Splash Guard
€ 38.99
No reviews
Set of 4 mudflaps that are universal fitment suitable for the vast majority of Kia models of Cars/Vans Including Fiesta Mondeo Focus Mustang
Fitting front left or right, rear left or right
High quality vinyl printing, Manufactured in Ireland
These are Universal Mud Flaps and are not moulded mudflaps.
These mudflaps come complete with fitting screws
Product information
Technical Details
Brand
LK Auto
Item Weight
1.8 Kg
Manufacturer reference
001
Manufacturer Part Number
001
Product description
These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Kia Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Kia Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions:
.
Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole.
First thing to do when fitting is line the mud flaps to the edge of bumper.
If you need to bore guide holes for screws you will need to do this now.
Now screw into place and make sure they line up correctly and job is done.
FULL SET OF 4 (FRONT & REAR) High Quality universal Mudflaps & fittings for 1, 3, 5 & 7 Series Cars & 4X4
€ 38.99
No reviews
Set of 4 mudflaps that are universal fitment suitable for the vast majority of BMW models of Cars/Vans
Fitting front left or right, rear left or right
High quality vinyl printing, Manufactured in Ireland
These are Universal Mud Flaps and are not moulded mudflaps.
These mudflaps come complete with fitting screws
Product information
Technical Details
Brand
LK Auto
Manufacturer reference
001
Manufacturer Part Number
001
Product description
These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of BMW models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory BMW Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions:
.
Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole.
First thing to do when fitting is line the mud flaps to the edge of bumper.
If you need to bore guide holes for screws you will need to do this now.
Now screw into place and make sure they line up correctly and job is done.
FULL SET OF 4 (FRONT & REAR) opel logo only Car Mud Flap MudFlaps Fender Splash Guard
€ 38.99
1 review
Product Details
Set of 4 mudflaps that are universal fitment suitable for the vast majority of Ford models of Cars/Vans Including Fiesta Mondeo Focus Mustang
Fitting front left or right, rear left or right
High quality vinyl printing, Manufactured in Ireland
These are Universal Mud Flaps and are not moulded mudflaps.
These mudflaps come complete with fitting screws
Product information
Technical Details
Brand
LK Auto
Item Weight
1.8 Kg
Manufacturer reference
001
Manufacturer Part Number
001
Product description
These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Ford Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions:
.
Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole.
First thing to do when fitting is line the mud flaps to the edge of bumper.
If you need to bore guide holes for screws you will need to do this now.
Now screw into place and make sure they line up correctly and job is done.
Complete set of 4 Universal Quality Mudflaps Splash Guard Fender Mudguard Fits all vehicles
€ 38.99
No reviews
Set of 4 mudflaps that are universal fitment suitable for the vast majority of Cars/Vans
Fitting front left or right, rear left or right
High quality vinyl printing, Manufactured in Ireland
These are Universal Mud Flaps and are not moulded mudflaps.
These mudflaps come complete with fitting screws
These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Opel models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price
LK AUTO FACTORS
We are a professional automotive store with over 30 years experience in the industry. Our commitment is to provide high quality products at affordable prices with extensive warranties offering peace of mind.