All (3618)

Our heavy duty 7HP Wacker plate compactor offers 6500 rpm operation speed with a 7 hp engine, which can be used for asphalt, soil, sand, gravel and mixer soils in the construction, civil or road engineering, gardening, landscaping and more. This vibratory compactor provides 10.5 kn impact force and 20 cm compaction depth to ensure project base material is fully compacted. It can travel up to 12 metres per minute, making quick work of a big job. Bottom plate is made of steel, offering more strength, flatness and smoothness. It includes the PU mat, which will reduce the vibration and prevent your compactor plate from scratching, while not reduce the travel speed or compaction force. Additionally, the throttle lever allows you to adjust engine speed from fast to slow. It includes fold-down transport wheel and handlebar for easy transport and storage when not in use. The compactor is easy to assemble.Product Specifications:Colour: Yellow and blackCompactor weight: 65 kgPlate size: 510 x 350 mm (L x W)Plate thickness: .5 mmImpact force: 10.5 KnPower: 7 hpCompaction depth: 15 cmRotary speed: 6500  rpmWalking speed: 22-26 m/minClimb angle: 0-20 degreeVibration: 13,5 m/s2Includes throttle lever to adjust engine speed (fast-low)Includes fold-down transport wheels

New for 2021 we have the LK1214 Plasma Cutter which has the capabilities to easily cut 12 mm - 14mm Our new LK Plasma Cutter due to its revised size and weight greatly reduces the dimensions and weight of the main transformer. This allows the Cutter to achieve an energy-saving which can reach up to 50% as well as efficiency increase by 30% of other similar products in the market. The LK Plasma Cutter incorporates an efficient cooling system to protect the machine from damage with an exceptionally strong cooling fan on the reverse side to dissipate heat. We suggest that this is perfect for home DIY,  in the garage and general repairing work such as cutting stainless steel, alloy steel, mild steel, copper, and aluminium.Instant Setup:The whole machine can be set up quickly within minutes. The 220V input design allows the machine to easily connect to your existing wall outlet. Accessories IncludedHere at LK we have prepared a standard accessory kit for you, including the Plasma cutter, a Ground clamp, a Plasma Cutting Torch, Air Filter and a Pressure Gage (installed inside the machine)Portable:The inverter plasma cutter has a new ergonomic design that makes the whole machine easy to take from job to job. Usability:Our New Lk performance Plasma Cutter is suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair, and maintenance services. Rated Output Voltage:220V Duty Cycle: 65% at 50 Amps and 100% at 30 Amps Max Cutting Thickness: 12 - 14 mm MAX Rated Output Current: 50 Amps Frequency: 50 and 60 Hz with operating air pressure at 75 psi Rated Input Power: 5.5 KVA The New LK Performance Plasma Cutter also features a High Frequency startup calibration system which assists the user when tackling rusty, painted, or expanded metal. We are confident here at LK Auto Factors that with a little practice, almost anyone, even a complete novice can become skilled at plasma cutting. If you are just looking to try your hand at plasma cutting before you make a huge financial commitment, this unit can certainly provide the basic training you need. All Products Come with a 12 Month Warranty, we also stock spares and upgrades for all of our systems.

【TECH DETAILS】26CC – 2-Stroke engine offers powerful performance | 10″ bar and chain make cutting easier | Heavy-duty air filter helps add longevity to the engine | Can cut 210 mm diameter trees | Low emissions | 3.5kg Lightweight and manoeuvrable | Reliable safety chain break to prevent accidents ✅【SPECIFICATIONS】Dimensions LxWxH 250x230x220 mm | Engine type 2-Stroke | Engine displacement 25.4 cc | Chain bar length 250 mm | Chain tension adjustment Yes | Chain brake Yes | Oil tank capacity 0.16 L | Fuel tank capacity 0.23L ✅【EASY TO OPERATE w/ LESS VIBRATION 】The ergonomic design makes this chainsaw balanced, manoeuvrable, and comfortable to operate. Use Low kick back chain for smooth, fast cutting through wet and dry timber, Front and Back Anti-vibration Handles for comfortable operation. ✅【SAFE TO USE】This petrol chainsaw is real easy start up, easy use and overall reliable, also safety with its safety valve throttle switch For safety or efficiency, it’s equipped with assisted starting system and quick stopping control. ✅【1 YEAR WARRANTY & INCLUSION】This product comes with Full Safety Gear, Cover Bag for easy storage and comes with 3 Chains and 10″ Bar Included. 1 x Blade Guard, 1 x Fuel Mixing Bottle, 1 x Toolkit in storage case and 1 x Detailed English User Manual

This LK Performance air-Operated oil drain is extremely stable and easy to operate. - With an 80L Capacity - 5L Glass Measuring Unit - Wheels for easy Movement - Double Sealed Oil Tank - High Quality Fittings - Easy to Use Featuring a durable, all-steel design and reinforced body, the oil drain provides a safe, affordable option for draining, transferring and evacuating motor oils, as well as transmission and power steering fluids. It offers excellent mobility, easy bowl positioning and simple-to-use pressurized evacuation   

Product Details: Set of 4 mudflaps that are universal fitment suitable for the vast majority of Subaru models of Cars Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001   Product description These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Subaru Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Subaru Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.

Product Details: Set of 4 mudflaps that are universal fitment suitable for the vast majority of Ford models of Cars/Vans Including Fiesta Mondeo Focus Mustang Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001   Product description These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Ford Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.

RDX Trunk lid spoiler VW Jetta 6 2010+Made from flexible ABS plastic, new, unpainted (black), including adhesive tape and TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX rear lip Audi A4 B8 Sedan tailgate spoiler rear spoiler   Scope of delivery:> rear lip> assembly tape (already applied)Article and quality features:> Delivery is in black, unpainted.> Easy to paint, cleanly processed surface structure.> Made from high quality, flexible ABS plastic. Installationnote:> The rear lip is simply glued to the trunk lid using mounting adhesive tape (already applied).  

RDX rear lip top VW Passat B8 3G rear window cover rear spoiler   Scope of delivery:> rear window spoiler> mounting tape (already applied)Article and quality characteristics:> Delivery is in black, unpainted.> Easy to paint, cleanly processed surface structure.> Made from high quality, flexible ABS plastic. Installationinstructions:> The rear lip is simply glued to the rear window using assembly adhesive tape (already applied).

LK Performance RDX Front Spoiler VARIO-X TOYOTA Auris E150 (-2010) Front Lip SplitterVARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval> Mounting Kit> Mounting InstructionsVARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-qualitypolyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface.The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and thereforeready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour.The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile.The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are includedABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

Our amazing tool box is the ideal companion for all your work, whether in the garage or at home. On 4 different levels, you can find a range of tools such as screwdrivers, spanners, pliers and even a hot glue gun.With the soft wheels and the transport handle, you can easily move the tools around. PRODUCT DESCRIPTION: Hammer, Screwdriver, Tape measure, Carpenter's square, Combination spanner, open-end spanner, eye spanner, spanner, mallet, bolt cutter, punch, punch, giant pliers, axe, tarpaulin, glue brush, paint tray, paint brushes, paint roller, handsaw, hacksaw, clamp, chisel, punch, cutting discs, calipers, screws, nails, bolts, whetstone, hole saw, decameter, false square, carpenter's pencils, metal drills, concrete drills, wood drills, precision screwdriver, impact screwdriver, ferret, tracing tip, sandpaper, magnifying glass, clamping straps, nail puller, carpenter's pincers, Russian pincers, vice-grip pliers, multi-socket pliers, universal pliers, cutting pliers, flat nose pliers, round-nose pliers, half-round pliers, wire strippers, eyelet pliers, ropes, dowels, toolbox, trapeze level, locks, winder, glue gun, soldering iron, bungee cords, vice, metal files, wood rasps, padlocks, walker...

Set of 2 mudflaps that are universal fitment suitable for the vast majority of Vauxhall Opel GM models of Cars/Vans Including Corsa Insignia Astra Belmount Vectra Calibra Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws These are a set of 2 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Vauxhall, GM and Opel models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price

Set of 4 mudflaps that are universal fitment suitable for All Citroen models of Cars and 4x4 Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for Citroen Vehicles fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Citroen Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price

Product Details Set of 4 mudflaps that are universal fitment suitable for the vast majority of Ford models of Cars/Vans Including Fiesta Mondeo Focus Mustang Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001   Product description These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Ford Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.

RDX Front Spoiler VW Polo 6R Made from PUR plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models, excepting GTI ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.