All (3617)

RDX side skirts AUDI A6 4B "Slim Scope of delivery:> Side skirts set (left / right)> Mounting accessories> TÜV approval , 100% registration free!> Installation instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, simple installation> Ready-to-install surface in high-gloss black. Does not have to be painted (but can of course)> Made of high quality OEM plastic ABS . Flexible, break and shatterproof. Installation instructions > Simple adhesive assembly with the included mounting accessories.

RDX bonnet trim Audi A6 4B C5 facelift (2001+) "SingleFrame" Evil eye Scope of delivery:> Bonnet cover with integrated "evil eye"> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Break and splinter-proofassembly instructions & advantages over bumpers that require a complete GRP engine hood:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A6 / A8 look.> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, as the RDX bonnet cladding is significantly cheaper than a complete bonnet.> For complete GRP- Bonnets can quickly form bubbles due to the enormous engine heat. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> With complete GRP bonnets, often not all or no interior parts of the original bonnet can be taken over, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.

RDX front bumper Audi A6 4B C5 facelift (from 01) "SingleFrame" front apron front Scope of delivery:> Front bumper> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> All, except V8, S6, RS6, AllroadArticle and quality features : > Perfectfit thanks to precision manufacturing, mounting points integrated> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, break-proof and splinter-proof Installationinformation:> The bonnet must be modified. This is very easily solved, there are 2 different options:Variant 1: Cut the bonnet to the left and right of the factory grill. Seal and varnish the interfaces. If the working white is clean, painting the bonnet is not absolutely necessary. It is sufficient to paint the interfaces.Variant 2: Cut the bonnet to the left and right of the factory grill. Install the RDX bonnet trim on the bonnet.> With regard to the shape of the side openings, the bumper is suitable for installing the Audi S6-4F daytime running lights.

RDX headlight spoilers Audi A6 4B facelift (2001+) Evil eye   Scope of delivery:> headlight cover set (left / right)> mounting tape> TÜV approval , 100% registration-free!Suitable for:> AllItem and quality features:> Made of high quality ABS plastic in OEMsupplied> are in black, can be so installed or painted in the body colorInstallation note:> The headlight covers are simply stuck with the included mounting tape on the headlight glass.

RDX rear spoiler Audi A6 4F sedan rear wing spoiler  Scope of delivery:> rear spoiler> TÜV parts certificate , 100% TÜV-tested and approved!> Assembly accessories and instructionsSuitable for:> all limousineArticle and quality features : > Perfectfit thanks to precision manufacturing> Unpainted. Spray friendly, clean processed surface structure> Manufactured from high-quality PUR-IHS plastic (original equipment manufacturer)Installation note:> Assembly simply by screwing on the tailgate with the included mounting accessories

RDX side skirts AUDI A6 4F "Slim" Scope of delivery:> Side skirts set (left / right)> Mounting accessories> TÜV approval , 100% registration free!> Installation instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, simple installation> Ready-to-install surface in high-gloss black. Does not have to be painted (but can of course)> Made of high quality OEM plastic ABS . Flexible, break and shatterproof. Installation instructions:> Simple adhesive assembly with the included mounting accessories.

RDX front spoiler VARIO-X AUDI A6 4F 2008-2011 front lip front attachment front spoiler lip  VARIO-X by RDX: Innovative 3-part front spoiler 3-part production. 1-piece, custom-fit and ready-to-install delivery Original equipment material PUR plastic Quality product, Made in Germany ABE and mounting kit included Simple screw assembly without gluing Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.

RDX front spoiler VARIO-X AUDI A6 4F 2008-2011 front lip front attachment front spoiler lipVARIO-X by RDX: Innovative 3-part front spoiler 3-part production.1-piece, custom-fit and ready-to-install delivery Original equipment material PUR plastic Quality product, Made in Germany ABE and mounting kit included Simple screw assembly without gluing Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes Scope of delivery:> Front spoiler VARIO-X>ABE(registration-free)>Assemblyaccessories> Installation instructionsVARIO-X Article and qualityfeatures:The VARIO-X is an innovative qualityproductfrom RDX, Made in Germany!This shapely front spoiler is made of high qualityPUR plastic (polyurethane).This material is also used in original equipment and is extremelyunbreakable.The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts.Thedeliveryis in one piece and thereforeready to grow.The 3-part production makes it easy to implement individual paintwork, among other things.The VARIO-X can be screwed apart in a few seconds.For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.Theinstallation ofthe VARIO-X front spoiler is extremelysimpleand, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge.The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed.Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged.The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X isTÜV-tested, approved and registration-free.AnABEis included.The overall height of the VARIO-X front spoiler is 4 cm.When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *.Different spacers are included.* A change in depth after registration requires an update of the registration.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX front spoiler VARIO-X AUDI A6 4F 2008-2011 front lip front attachment front spoiler lip  VARIO-X by RDX: Innovative 3-part front spoiler 3-part production. 1-piece, custom-fit and ready-to-install delivery Original equipment material PUR plastic Quality product, Made in Germany ABE and mounting kit included Simple screw assembly without gluing Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.

RDX front spoiler VARIO-X AUDI A6 4F -2008 (S-Line front bumper) front lip front extension front spoiler lip   VARIO-X by RDX: Innovative 3-part front spoiler 3-part production. 1-piece, custom-fit and ready-to-install delivery Original equipment material PUR plastic Quality product, Made in Germany ABE and mounting kit included Simple screw assembly without gluing Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.

RDX front spoiler VARIO-X AUDI S6 4F front lip front attachment front spoiler lip   VARIO-X by RDX: Innovative 3-part front spoiler 3-part production. 1-piece, custom-fit and ready-to-install delivery Original equipment material PUR plastic Quality product, Made in Germany ABE and mounting kit included Simple screw assembly without gluing Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.

RDX front spoiler VARIO-X AUDI S6 4F front lip front attachment front spoiler lip   VARIO-X by RDX: Innovative 3-part front spoiler 3-part production. 1-piece, custom-fit and ready-to-install delivery Original equipment material PUR plastic Quality product, Made in Germany ABE and mounting kit included Simple screw assembly without gluing Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.

RDX headlight spoilers Audi A6 4F facelift 2008-2011 Evil eye Scope of delivery:> headlight cover set (left / right)> mounting tape> TÜV approval , 100% registration-free!Suitable for:> Allarticle and quality features:> Made of high quality ABS plastic. Flexible, break-proof and splinter-proof> Delivered in black, can be installed in this way or painted in the vehicle color.Installation note:> The headlight covers are simply glued to the headlight glass with the enclosed mounting tape.

RDX headlight spoilers Audi A6 4F -09/2008 Evil eye Scope of delivery:> headlight cover set (left / right)> mounting tape> TÜV approval , 100% registration-free!Suitable for:> Allarticle and quality features:> Made of high quality ABS plastic. Flexible, break-proof and splinter-proof> Delivered in black, can be installed in this way or painted in the vehicle color.Installation note:> The headlight covers are simply glued to the headlight glass with the enclosed mounting tape.

RDX rear lip Audi A6 4G Sedan tailgate spoiler rear spoiler  Scope of delivery:> rear lip> assembly tape (already applied)Article and quality features:> Delivery is in black, unpainted.> Easy to paint, cleanly processed surface structure.> Made from high quality, flexible ABS plastic. Installationnote:> The rear lip is simply glued to the trunk lid using mounting tape (already applied).