All (3617)

RDX Rear Diffusor U-Diff XL (wide version) UniversalU-Diff XL universal rear diffusor by RDX: Stylish 1-piece rear diffusor OEM-Material PUR-Plastic Quality-product, Made in Germany TÜV approval inclusive Easy installation by screws with the included mounting kit Delivery content: > U-Diff XL rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff XL article- und quality features:The U-Diff XL is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff XL rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff XL rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff XL rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff XL rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff XL rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff XL rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-Diff XL rear diffusor is 71.5 cm. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff XL rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff XL rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Rear Diffusor U-Diff UniversalU-Diff universal rear diffusor by RDX: Stylish 1-piece rear diffusor OEM-Material PUR-Plastic Quality-product, Made in Germany TÜV approval inclusive Easy installation by screws with the included mounting kit Delivery content: > U-Diff rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff article- und quality features:The U-Diff is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-diff rear diffusor is 52.5 cm. This corresponds approximately to the level of a normal-euro plate. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Universal Wheel Arches FENDER-X RDX Universal Wheel Arches FENDER-X•\\\\\\\\tSet consists of 4 pieces•\\\\\\\\tLength 150cm each wheel arche. Can be individually cut to size•\\\\\\\\tHighly flexible and 3D glueable•\\\\\\\\tUniversally usable for all vehicles (cars, trucks, etc.)•\\\\\\\\tTÜV approval inclusive•\\\\\\\\tWith already applied, high tack adhesive tape as assembling aid•\\\\\\\\tGreat appearance and improved wheel coveringDelivery content•\\\\\\\\t4x Wheel arches•\\\\\\\\tAdhesive tape (already applied)•\\\\\\\\tTÜV approval•\\\\\\\\tInstallation instruction (integrated in TÜV approval)FENDER-X article- und quality featuresThe universal wheel arches FENDER-X are an innovative quality product by RDX. This stylish wheel arches are made of high flexible PUR plastic. Thanks to the high-quality surface, the FENDER-X wheel arches can be mounted in delivery condition (plastic black matt) to the vehicle. The wheel arches FENDER-X are also suitable for painting and foliation.The installation of the wheel arches FENDER-X is extremely simple and can be made at any time without prior knowledge. The installation must be in heated condition, as the wheel arches FENDER-X get highly flexible and can simply be glued with the already applied 3M-adhesive tape to the wheel arche on the vehicle. Finally, a body adhesive (not included in the delivery content) should be applied from the inside (a blob), especially at the ends of the FENDER-X wheel arches to ensure long-lasting hold.The universal wheel arches FENDER-X will be delivered with a TÜV approval. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Universal Spoiler lip SAFE `N STYLERDX Universal Spoiler lip SAFE `N STYLE Length 250cm, can be individually cut to size Highly flexible and 3D glueable Universally usable for all vehicles (Cars, trucks, scooters, etc.) TÜV approval inclusive Can be used as a front spoiler lip at the front, side skirts at the side, rear apron at the rear and much more With already applied, high tack adhesive tape as assembling aid Great appearance and protection effect at the same time. If you hit the ground the spoiler lip protects painted bumpers / spoilers against scratches and is also sporty, great looking! Delivery content > Spoiler lip (250cm) > Adhesive Tape (already applied) > TÜV approval > Installation instruction (integrated in TÜV approval)SAFE `N STYLE article- und quality features The universal spoiler lip SAFE `N STYLE is an innovative quality product by RDX. This stylish spoiler lip is made of highly flexible PP-EPDM plastic with rubber-/flexible foam properties. The universal spoiler lip SAFE `N STYLE is user-ready, finished in black, thus there are no additional costs for painting. The spoiler lip is not suitable for painting and foliation. The installation of the the universal spoiler lip SAFE `N STYLE is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible as rubber, 3D glueable and will be simply glued from below to the desired location on the vehicle. With already applied, high tack adhesive tape as assembling aid. To ensure long-lasting hold, screws, body adhesive or rivets are supplementary to install. The design of the vehicle remains unrestricted. The universal spoiler lip SAFE `N STYLE gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 1cm in depth on. How much the spoiler lip sticks out on the outside can be determined by yourself in adhering the spoiler lip less or more overlapping. The universal spoiler lip SAFE `N STYLE can be installed up to 4 cm to the outside. Of course, the spoiler can also be mounted invisibly, without standing out. In this case, the universal spoiler lip SAFE \\\\\\\\\\\\\\\\´N STYLE is for protection of the vehicle or vehicle parts. The universal spoiler lip SAFE `N STYLE will be delivered with a TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Universal Spoiler lip CUP2.0 Front SplitterRDX Universal Spoiler lip CUP2.0 Simple installation with included Rivets Highly flexible black PUR-plastic (PUR-RIM) Universally usable for a huge range of cars Delivery content > Spoiler lip > Rivets > ABE / Approval > Installation instruction (integrated in ABE / Approval)CUP2.0 article- und quality features The universal spoiler lip CUP2.0 is an innovative quality product by RDX, Made in Germany. This stylish spoiler lip is made of highly flexible PUR-plastic (PUR-RIM) with high flexible properties. The universal spoiler lip CUP2.0 is user-ready in black, thus there are no additional costs for painting. The spoiler lip is suitable for painting. The installation of the the universal spoiler lip CUP2.0 is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible and will be installed with rivets from below to the desired location on the vehicle. The design of the vehicle remains unrestricted. The universal spoiler lip CUP2.0 gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 3,5cm in depth on. The universal spoiler lip CUP2.0 will be delivered with a ABE Approval for more than 200 car models.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Rear Diffusor U-Diff XL (wide version) UniversalU-Diff XL universal rear diffusor by RDX: Stylish 1-piece rear diffusor OEM-Material PUR-Plastic Quality-product, Made in Germany TÜV approval inclusive Easy installation by screws with the included mounting kit Delivery content: > U-Diff XL rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff XL article- und quality features:The U-Diff XL is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff XL rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff XL rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff XL rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff XL rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff XL rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff XL rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-Diff XL rear diffusor is 71.5 cm. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff XL rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff XL rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Rear Diffusor U-Diff UniversalU-Diff universal rear diffusor by RDX: Stylish 1-piece rear diffusor OEM-Material PUR-Plastic Quality-product, Made in Germany TÜV approval inclusive Easy installation by screws with the included mounting kit Delivery content: > U-Diff rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff article- und quality features:The U-Diff is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-diff rear diffusor is 52.5 cm. This corresponds approximately to the level of a normal-euro plate. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Universal Spoiler lip SAFE `N STYLERDX Universal Spoiler lip SAFE `N STYLE Length 250cm, can be individually cut to size Highly flexible and 3D glueable Universally usable for all vehicles (Cars, trucks, scooters, etc.) TÜV approval inclusive Can be used as a front spoiler lip at the front, side skirts at the side, rear apron at the rear and much more With already applied, high tack adhesive tape as assembling aid Great appearance and protection effect at the same time. If you hit the ground the spoiler lip protects painted bumpers / spoilers against scratches and is also sporty, great looking! Delivery content > Spoiler lip (250cm) > Adhesive Tape (already applied) > TÜV approval > Installation instruction (integrated in TÜV approval)SAFE `N STYLE article- und quality features The universal spoiler lip SAFE `N STYLE is an innovative quality product by RDX. This stylish spoiler lip is made of highly flexible PP-EPDM plastic with rubber-/flexible foam properties. The universal spoiler lip SAFE `N STYLE is user-ready, finished in black, thus there are no additional costs for painting. The spoiler lip is not suitable for painting and foliation. The installation of the the universal spoiler lip SAFE `N STYLE is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible as rubber, 3D glueable and will be simply glued from below to the desired location on the vehicle. With already applied, high tack adhesive tape as assembling aid. To ensure long-lasting hold, screws, body adhesive or rivets are supplementary to install. The design of the vehicle remains unrestricted. The universal spoiler lip SAFE `N STYLE gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 1cm in depth on. How much the spoiler lip sticks out on the outside can be determined by yourself in adhering the spoiler lip less or more overlapping. The universal spoiler lip SAFE `N STYLE can be installed up to 4 cm to the outside. Of course, the spoiler can also be mounted invisibly, without standing out. In this case, the universal spoiler lip SAFE \\\\\\\\\\\\\\\\´N STYLE is for protection of the vehicle or vehicle parts. The universal spoiler lip SAFE `N STYLE will be delivered with a TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Front Spoiler VARIO-X VW Arteon R-Line Front Lip Splitter VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval ABE> Mounting Kit> Mounting Instructions VARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW CC "Slim Made from ABS plastic, new, black highgloss. Including TÜV approval and installation accessories. Fits all models. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Roof Spoiler VW Passat B7 / 3C Variant Station WagonMade from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TUEV approval. Fits all models.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW Passat B7 / 3C "GT-Race" Made from ABS plastic, new, unpainted, including installation accessories, aluminium mesh (silver) and instruction, TÜV approval. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Front Spoiler VARIO-X VW Passat B7 / 3C Front Lip Splitter VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval ABE> Mounting Kit> Mounting Instructions VARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Roof Spoiler VW Passat 3C Variant Made from GFK plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits Variant ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW Passat 3C "Slim Made from ABS plastic, new, black highgloss. Including TÜV approval and installation accessories. Fits all models. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.