RDX Race Design Body Kits
LK Performance rear lip Audi A7 4G tailgate spoiler rear spoiler
€ 42.00
RDX rear lip Audi A7 4G tailgate spoiler rear spoiler
Scope of delivery:> rear lip> assembly tape (already applied)Article and quality features:> Delivery is in black, unpainted.> Easy to paint, cleanly processed surface structure.> Made from high quality, flexible ABS plastic. Installationnote:> The rear lip is simply glued to the trunk lid using mounting tape (already applied).
LK Performance side skirts AUDI A7 2010-2018 (also S-Line) "Slim"
€ 129.00
RDX side skirts AUDI A7 2010-2018 (also S-Line) "Slim"
Scope of delivery:> Side skirts set (left / right)> Mounting accessories> TÜV approval , 100% registration free!> Installation instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, simple installation> Ready-to-install surface in high-gloss black. Does not have to be painted (but can of course)> Made of high quality OEM plastic ABS . Flexible, break and shatterproof. Installation instructions:> Simple adhesive assembly with the included mounting accessories.
LK Performance front spoiler VARIO-X AUDI A7 & S7 2014-2018 (S-Line or S7 front bumper)
€ 199.00
LK Performance rear lip Audi A8 D2 tailgate spoiler rear spoiler
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance front spoiler VARIO-X AUDI A7 & S7 2010-2014 (S-Line or S7 front bumper)
€ 199.00
LK Performance rear lip Audi A8 D2 tailgate spoiler rear spoiler
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance front spoiler VARIO-X AUDI A7 2010-2014 front lip front attachment
€ 199.00
LK Performance rear lip Audi A8 D2 tailgate spoiler rear spoiler
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance rear lip Audi A8 D2 tailgate spoiler rear spoiler
€ 42.00
LK Performance rear lip Audi A8 D2 tailgate spoiler rear spoiler
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance side skirts AUDI A8 D2 "Slim"
€ 152.00
RDX side skirts AUDI A8 D2 "Slim"
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance side skirts Audi A8 D2 for long version "Turbo"
€ 199.00
RDX front bumper Audi A8 D2 "SingleFrame" (incl. Hood cover) front apron front
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance side skirts Audi A8 D2 "Turbo"
€ 199.00
RDX front bumper Audi A8 D2 "SingleFrame" (incl. Hood cover) front apron front
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance front bumper Audi A8 D2 "SingleFrame" (incl. Hood cover) front apron front
€ 704.00
RDX front bumper Audi A8 D2 "SingleFrame" (incl. Hood cover) front apron front
Scope of delivery:> Front bumper> Bonnet cladding with integrated "evil eye"> Grille (choose from 4 versions below)> TÜV parts certificate , 100% TÜV-tested and approved!>Assembly accessories > Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, integrated fastening points> Unpainted. Paint-friendly, cleanly processed surface structure> Made from high-quality GRP . Flexible, unbreakable and shatterproofAssembly Note:> The original bonnet remains as the basis. Only the frame of the factory grille is cut away from the original bonnet (only cut off to the left and right of the grill, done). The RDX bonnet trim is then glued to the original bonnet using the special adhesive provided. The bonnet cladding is full-surface, covers the entire bonnet and has an "evil eye" integrated in the new A8 look.> Suitable for vehicles with and without headlamp cleaning systems.> The LED daytime running lights from the current Audi S6 can be fitted.Advantages compared to bumpers that require a complete GRP bonnet:> The factory bonnet is retained and does not have to be dismantled, so it does not have to be adjusted to the gap dimensions.> You save on the purchase of parts, since the RDX front bumper includes the bonnet cladding, there is no need to buy an additional bonnet.> With complete GRP engine hoods, the enormous engine heat can quickly cause bubbles to form. In this case, sanding, filling and painting would be necessary.> Complete GRP engine hoods also require painting the inside, which significantly increases the painting costs.> For complete GRP- Bonnets often cannot take over all or none of the interior parts of the original bonnet, which in addition to the technical disadvantages also results in visual disadvantages.> Result: When converting in connection with a complete GRP bonnet, you usually get more expensive both in terms of purchase and conversion, although it is probably the poorer quality of the conversion.
LK Performance rear lip Audi A8 D3 4E tailgate spoiler rear spoiler
€ 42.00
RDX rear lip Audi A8 D3 4E tailgate spoiler rear spoiler
Scope of delivery:> rear lip> assembly tape (already applied)Article and quality features:> Delivery is in black, unpainted.> Easy to paint, cleanly processed surface structure.> Made from high quality, flexible ABS plastic. Installationnote:> The rear lip is simply glued to the trunk lid using mounting tape (already applied).
LK Performance side skirts AUDI A8 D3 / 4E "Slim"
€ 152.00
RDX side skirts AUDI A8 D3 / 4E "Slim"
Scope of delivery:> Side skirts set (left / right)> Mounting accessories> TÜV approval , 100% registration free!> Installation instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing, simple installation> Ready-to-install surface in high-gloss black. Does not have to be painted (but can of course)> Made of high quality OEM plastic ABS . Flexible, break and shatterproof. Installation instructions:> Simple adhesive assembly with the included mounting accessories.
LK Performance front spoiler VARIO-X AUDI A8 D3 / 4E -2005 (all, incl. W12 or S8) front lip front attachment front spoiler lip
€ 176.00
RDX front spoiler VARIO-X AUDI A8 D3 / 4E -2005 (all, incl. W12 or S8) front lip front attachment front spoiler lip
VARIO-X by RDX:
Innovative 3-part front spoiler
3-part production. 1-piece, custom-fit and ready-to-install delivery
Original equipment material PUR plastic
Quality product, Made in Germany
ABE and mounting kit included
Simple screw assembly without gluing
Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes
Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.
LK Performance rear spoiler AUDI A8 D3 / 4E
€ 152.00
RDX rear spoiler AUDI A8 D3 / 4E
Scope of delivery:> rear spoiler> TÜV parts certificate , 100% TÜV-tested and approved!> Assembly accessories and instructions> Fitting instructionsSuitable for:> Allarticle and quality features : > Perfectfit thanks to precision manufacturing> Unpainted. Spray friendly, clean processed surface structure> Manufactured from high-quality PUR-IHS plastic (original equipment manufacturer)Installation note:> Assembly simply by screwing on the tailgate with the included mounting accessories
LK Performance front spoiler VARIO-X AUDI Q2 S-Line 2016+ front lip front attachment
€ 176.00
RDX front spoiler VARIO-X AUDI Q2 2016+ front lip front attachment front spoiler lip
VARIO-X by RDX:
Innovative 3-part front spoiler
3-part production. 1-piece, custom-fit and ready-to-install delivery
Original equipment material PUR plastic
Quality product, Made in Germany
ABE and mounting kit included
Simple screw assembly without gluing
Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes
Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.
LK Performance Front Spoiler VARIO-X AUDI Q2 2016+ Front Lip Splitter
€ 176.00
RDX front spoiler VARIO-X AUDI Q2 2016+ front lip front attachment front spoiler lip
VARIO-X by RDX:
Innovative 3-part front spoiler
3-part production. 1-piece, custom-fit and ready-to-install delivery
Original equipment material PUR plastic
Quality product, Made in Germany
ABE and mounting kit included
Simple screw assembly without gluing
Screwing only from below in the invisible area, sodisassembly (e.g. in winter) possible at any time and in minutes
Scope of delivery:> Front spoiler VARIO-X> ABE (registration-free)>Assembly accessories > Installation instructionsVARIO-X Article and quality features :The VARIO-X is an innovative quality product from RDX, Made in Germany! This shapely front spoiler is made of high qualityPUR plastic (polyurethane) . This material is also used in original equipment and is extremely unbreakable . The VARIO-X is delivered unpainted in black and has a neatly processed, paint-friendly surface.The VARIO-X is made up of a middle part and a side part each, i.e. 3 parts. The delivery is in one piece and thereforeready to grow . The 3-part production makes it easy to implement individual paintwork, among other things. The VARIO-X can be screwed apart in a few seconds. For example, the sides of the VARIO-X can be painted in body color and the middle part in contrasting color.The installation of the VARIO-X front spoiler is extremely simple and, thanks to its absolutely precise fit, can be done at any time, even without previous knowledge. The VARIO-X front spoiler is simply attached to the existing bumper from below using the attached mounting kitscrewed. Accordingly, it can be easily dismantled again at will, for example in winter, since the screws are only screwed on from below, i.e. in the non-visible area.The design of the bumper itself remains unchanged. The VARIO-X also gives the bumper and the entire vehicle a sporty, dynamic and deeper look.The VARIO-X is TÜV-tested, approved and registration-free . An ABE is included.The overall height of the VARIO-X front spoiler is 4 cm. When mounting, spacer sleeves can be placed between the VARIO-X and the bumper,thus regulating the depth *. Different spacers are included.* A change in depth after registration requires an update of the registration.