5
LK Performance RDX Rear Diffusor U-Diff XL (wide version) Universal MAZDA 5
€ 117.00
RDX Rear Diffusor U-Diff XL (wide version) UniversalU-Diff XL universal rear diffusor by RDX:
Stylish 1-piece rear diffusor
OEM-Material PUR-Plastic
Quality-product, Made in Germany
TÜV approval inclusive
Easy installation by screws with the included mounting kit
Delivery content: > U-Diff XL rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff XL article- und quality features:The U-Diff XL is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff XL rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff XL rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff XL rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff XL rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff XL rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff XL rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-Diff XL rear diffusor is 71.5 cm. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff XL rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff XL rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Rear Diffusor U-Diff Universal MAZDA 5
€ 117.00
RDX Rear Diffusor U-Diff UniversalU-Diff universal rear diffusor by RDX:
Stylish 1-piece rear diffusor
OEM-Material PUR-Plastic
Quality-product, Made in Germany
TÜV approval inclusive
Easy installation by screws with the included mounting kit
Delivery content: > U-Diff rear diffusor> TÜV approval > Mounting kit> Installation instructionU-Diff article- und quality features:The U-Diff is a universally usable rear diffusor by RDX, Made in Germany! This stylish rear diffusor, also called rear addon, is made of high quality PUR plastic (polyurethane). This material is also used in original equipment and is extremely break-resistant. The U-Diff rear diffusor will be delivered unpainted in black and has a cleanly worked up, paint friendly surface.The installation of the U-Diff rear diffusor is extremely simple and can be made at any time without prior knowledge. On the inside of the U-Diff rear diffusor are 4 installation domes with integrated metal-thread inserts. Through these installation domes the U-Diff rear diffusor will be simply screwed with the included mounting kit to the rear of the vehicle.The main design of the bumper remains unchanged. The U-Diff rear diffusor gives the bumper, respectively the entire vehicle a sporty, dynamic and slightly lower look.The U-Diff rear diffusor is TÜV approved. The TÜV approval is naturally included in the delivery content.The width of the U-diff rear diffusor is 52.5 cm. This corresponds approximately to the level of a normal-euro plate. All other relevant dimensions are shown on the dimensional drawing.Spacers could be used at installation of the U-Diff rear diffusor between the rear bumper, to regulate the depth and the inclination angle. Different spacers are included.The U-Diff rear diffusor is not suitable for vehicles with trailer hitch or center exhaust pipes.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Universal Wheel Arches FENDER-X MAZDA 5
€ 82.00
RDX Universal Wheel Arches FENDER-X
RDX Universal Wheel Arches FENDER-X•\\\\\\\\tSet consists of 4 pieces•\\\\\\\\tLength 150cm each wheel arche. Can be individually cut to size•\\\\\\\\tHighly flexible and 3D glueable•\\\\\\\\tUniversally usable for all vehicles (cars, trucks, etc.)•\\\\\\\\tTÜV approval inclusive•\\\\\\\\tWith already applied, high tack adhesive tape as assembling aid•\\\\\\\\tGreat appearance and improved wheel coveringDelivery content•\\\\\\\\t4x Wheel arches•\\\\\\\\tAdhesive tape (already applied)•\\\\\\\\tTÜV approval•\\\\\\\\tInstallation instruction (integrated in TÜV approval)FENDER-X article- und quality featuresThe universal wheel arches FENDER-X are an innovative quality product by RDX. This stylish wheel arches are made of high flexible PUR plastic. Thanks to the high-quality surface, the FENDER-X wheel arches can be mounted in delivery condition (plastic black matt) to the vehicle. The wheel arches FENDER-X are also suitable for painting and foliation.The installation of the wheel arches FENDER-X is extremely simple and can be made at any time without prior knowledge. The installation must be in heated condition, as the wheel arches FENDER-X get highly flexible and can simply be glued with the already applied 3M-adhesive tape to the wheel arche on the vehicle. Finally, a body adhesive (not included in the delivery content) should be applied from the inside (a blob), especially at the ends of the FENDER-X wheel arches to ensure long-lasting hold.The universal wheel arches FENDER-X will be delivered with a TÜV approval.
ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Universal Spoiler lip SAFE `N STYLE MAZDA 5
€ 39.00
RDX Universal Spoiler lip SAFE `N STYLERDX Universal Spoiler lip SAFE `N STYLE
Length 250cm, can be individually cut to size
Highly flexible and 3D glueable
Universally usable for all vehicles (Cars, trucks, scooters, etc.)
TÜV approval inclusive
Can be used as a front spoiler lip at the front, side skirts at the side, rear apron at the rear and much more
With already applied, high tack adhesive tape as assembling aid
Great appearance and protection effect at the same time. If you hit the ground the spoiler lip protects painted bumpers / spoilers against scratches and is also sporty, great looking!
Delivery content > Spoiler lip (250cm) > Adhesive Tape (already applied) > TÜV approval > Installation instruction (integrated in TÜV approval)SAFE `N STYLE article- und quality features The universal spoiler lip SAFE `N STYLE is an innovative quality product by RDX. This stylish spoiler lip is made of highly flexible PP-EPDM plastic with rubber-/flexible foam properties. The universal spoiler lip SAFE `N STYLE is user-ready, finished in black, thus there are no additional costs for painting. The spoiler lip is not suitable for painting and foliation. The installation of the the universal spoiler lip SAFE `N STYLE is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible as rubber, 3D glueable and will be simply glued from below to the desired location on the vehicle. With already applied, high tack adhesive tape as assembling aid. To ensure long-lasting hold, screws, body adhesive or rivets are supplementary to install. The design of the vehicle remains unrestricted. The universal spoiler lip SAFE `N STYLE gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 1cm in depth on. How much the spoiler lip sticks out on the outside can be determined by yourself in adhering the spoiler lip less or more overlapping. The universal spoiler lip SAFE `N STYLE can be installed up to 4 cm to the outside. Of course, the spoiler can also be mounted invisibly, without standing out. In this case, the universal spoiler lip SAFE \\\\\\\\\\\\\\\\´N STYLE is for protection of the vehicle or vehicle parts. The universal spoiler lip SAFE `N STYLE will be delivered with a TÜV approval.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.
LK Performance RDX Universal Spoiler lip CUP2.0 Front Splitter MAZDA 5
€ 70.00
RDX Universal Spoiler lip CUP2.0 Front SplitterRDX Universal Spoiler lip CUP2.0
Simple installation with included Rivets
Highly flexible black PUR-plastic (PUR-RIM)
Universally usable for a huge range of cars
Delivery content > Spoiler lip > Rivets > ABE / Approval > Installation instruction (integrated in ABE / Approval)CUP2.0 article- und quality features The universal spoiler lip CUP2.0 is an innovative quality product by RDX, Made in Germany. This stylish spoiler lip is made of highly flexible PUR-plastic (PUR-RIM) with high flexible properties. The universal spoiler lip CUP2.0 is user-ready in black, thus there are no additional costs for painting. The spoiler lip is suitable for painting. The installation of the the universal spoiler lip CUP2.0 is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible and will be installed with rivets from below to the desired location on the vehicle. The design of the vehicle remains unrestricted. The universal spoiler lip CUP2.0 gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 3,5cm in depth on. The universal spoiler lip CUP2.0 will be delivered with a ABE Approval for more than 200 car models.ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.* Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle. Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.