Best Selling Products (3634)

NEW for 2024 is the immense full steel LK Performance low profile jack with a solid 4 ton rating. Featuring a minimum height of less than 3 inches, just 75mm and a maximum lifting height of 505mm. The LK Performance 4 Ton jack is perfect for day to day maintenance on all sorts of vehicles. The removable two part handle makes storage breeze and the new dual action rapid pump makes the lifting incredibly easy. Couple this with the full 360˚ casters on the back, foam covered handle to protect your cars finish and you've got the jack you've always deserved. Constructed from an all welded steel body. These will look great in any garage. 12 Month Warranty Jacket colour subject to change

These are a full set of 4 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Ford Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.

These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for VW Vehicles fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Volkswagen Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.

LK Performance 200 Litre Compressor 3hp 12cfm, 10 BAR - FREE DELIVERY This New  LK Performance 200L 3hp Compressor with an updated XL pump is suitable for heavy, continuous operation and is ideal for workshops and professional use. This 200ltr compressor delivers versatility in a cost effective manner, This piece of equipment would suit both professionals and serious DIY enthusiasts alike. 1 Year Warranty **CE Marked and certified** Made In the Ukraine Side-by-side twin cylinder 3 wheels for optimum manoeuvrability Features 12 CFM displacement Large solid wheels for ease of transport Slow running belt for smooth, efficient operation Oil lubricated Multi-finned flywheel for improved cooling 1 years warranty Specifications Input voltage : 230V  Fuse rating : 13 amp Motor: 3 HP Receiver tank size : 200 litre Max. pressure 10 bar ALL COMPRESSORS ARE DELIVERED FULL OF THE CORRECT OIL, THEY ARE ALSO RAN CONTINUOUSLY BY OUR TECHNICIANS TO ENSURE OPERATION STANDARDS ARE MET. FREE DELIVERY THROUGHOUT NI & IRELAND ON THIS PRODUCT

NEW For Winter 6500K Cool White LED Car Headlight Bulbs H7 (Twin) CSP LED Chips Our new LED Collection implements specially selected diodes and OSRAM Opto Semiconductors which allows each bulb to achieve a striking light output up to 300% brighter than standard, with a highly stylish colour temperature of up to 6500K. This high Kelvin rating offers a modish, cool white light colour so you can drive in style in addition its massive light output allows for added safety and comfort on the road. Being up to 300% brighter than standard, our new H7 cool white light not only enhances your vision, but also heightens your visibility to other drivers, protecting you and them. Utilising a copper heat conductor and microprocessor the bulbs are able to safely dissipate heat while effectively maintaining voltage control, meaning that you can expect thousands of hours of efficiently produced, strong LED light from your bulbs. Remarkably the new H7 Led is self-regulating in terms of its power consumption, eliminating the bulbs’ risk of incompatibility with a vehicle’s electric wiring system. So you don’t have to worry about flickering lights or bulb error warnings on the dashboard – the bane of many LED upgrades. And with a simple, compact design and clear-to-follow instructions included, installation is a breeze. Features and Benefits 6500K colour temperature 12000 lumens 80w (40watt per bulb) Stylish cool white light  – close daylight colour match Up to 300% more light provided than standard Heat-management components to ensure longevity Very long lifespan Consistently diffused LED projection Easy installation – instructions included No need for additional installation of CAN bus control unit / adapter  4 CSP Led Chips 360° Super Bright Lighting Plug-N-Play (EMC-ready): - No error and flash problem (For 90% of vehicle) - Sized to perfectly fit your stock headlights and plug directly into your sockets. - EMC-ready,No Radio interference - 0.1 second 100% light-up Easy Installation: - All-in-one aluminium material and design makes it easy to install.   Plug-and-Play direct replacement in 20 mins.  PLEASE NOTE THAT IF YOU ARE UNSURE AS TO WHETHER THESE OR ANY OTHER LED BULBS WILL FIT YOUR VEHICLE PLEASE CONTACT ONE OF OUR HELPFUL STAFF ON ++353 74 9111000

This is our new 2023 High-Quality Petrol Powered 52cc BackPack Leaf Blower. These units are high quality and made in a factory alongside some of the more successful brands. The engines are powerful and easy starting. We carry all replacement parts for these if needed Air cooled two-stroke engine 30:1 Gas:Oil fuel mixture required 2800 rpm idle speed 7500 rpm wide-open throttle engine speed Easy-Starting 3.8 hp 210 mph output air velocity Commercial Duty 3-part modular blower tube Flexible hose between blower and hose Throttle slides back and forth on tube to adjust to your arm length 1 Year Warranty Engineer on site to resolve any issues LK Auto factors offers live customer service 7 days a week to everyone who buys it. We maintain a full line of replacement parts, as well as a full service repair center and have a team of technicians who can troubleshoot any issues you may have over the phone

These are a set of 2 mudflaps Our Mud Flaps are universal fitment suitable for VW Vehicles fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Volkswagen Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done. Please note to cover both the front and rear of the car you will need to buy to 2 sets of these mudflaps

LK Auto Factors has stocked a wide range of Manarola socket sets and the S5001 is a part of this ever-increasing range which is now available to buy online. This is a professional socket set which is made from chrome vanadium with a Beautiful Matt Black-Plated finish which gives it a really impressive look and comes protected in a high-density polythene oil and temperature-resistant carry case. This socket set contains sockets ranging from 10 mm to 32 mm and is an ideal partner to have with you at home, work or when working on the car in the garage.FEATURES:Quick socket release button on the ratchetHigh-performance alloy steelHigh-density polytheneMatt Black -PlatedINCLUDES:18 x 1/2" Drive 6 Point Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32 mm2 x 5" and 10" Extension Bar: 5"1 x Universal joint1 x T-adaptor1 x Breaker bar with two components handle 10"1 x 60 Teeth ratchet with two components handleCase 12 Month Warranty

These are a set of 2 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Ford Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done. Please note to cover both the front and rear of the car you will need to buy to 2 sets of these mudflaps

These are new in store, our Heavy Duty Aviation Spanner Set has Extra long slim shafts, mirror polished, hardened and tempered ring heads, which extends out from the shaft on one side Double hex ring spanner on either end comes in storage pouch Sizes: 8 x 10mm (Approx length: 234mm) 11 x 13mm (Approx length: 329mm) 14 x 15mm (Approx length: 369mm) 16 x 17mm (Approx length: 409mm) 18 x 19mm (Approx length: 409mm) 20 x 21mm (Approx length: 415mm) 22 x 24mm (Approx length: 432mm) The advantage of these are that the ring head of the Spanner extends out from the shaft on one side and sits flush with the shaft on the other side to allow you to reach Awkward nuts and bolts Each Spanner features Double ended Ring Spanner so one spanner has 2 rings with different sizes Extra long design for when you need extra leverage or for restricted access into awkward areas.

Set of 2 mudflaps that are universal fitment suitable for All VW models of Cars and 4x4 Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001 Product description These are a set of 2 mudflaps (White On Blue) Our Mud Flaps are universal fitment suitable for VW Vehicles fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Volkswagen Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done. Please note to cover both the front and rear of the car you will need to buy to 2 sets of these mudflaps

Product Details Set of 2 mudflaps that are universal fitment suitable for the vast majority of Seat models of Cars/Vans Including Ibiza, Alhambra, Leon, Cupra, Ateca, Arona Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting  Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001     Product description These are a set of 2 mudflaps Our Mud Flaps are universal fitment suitable for the majority of Seat Models of Cars/Vans fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Ford Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done. Please note to cover both the front and rear of the car you will need to buy to 2 sets of these mudflaps

Product Details Set of 4 mudflaps that are universal fitment suitable for All VW models of Cars and 4x4 Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001       Product description These are a set of 4 mudflaps Our Mud Flaps are universal fitment suitable for VW Vehicles fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Volkswagen Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.  

Set of 4 mudflaps that are universal fitment suitable for All VW models of Cars and 4x4 Fitting front left or right, rear left or right High quality vinyl printing, Manufactured in Ireland These are Universal Mud Flaps and are not moulded mudflaps. These mudflaps come complete with fitting screws Product information Technical Details Brand LK Auto Item Weight 1.8 Kg Manufacturer reference 001 Manufacturer Part Number 001 Product description These are a set of 4 mudflaps (White On Blue) Our Mud Flaps are universal fitment suitable for VW Vehicles fitting front left or right, rear left or right Manufactured in Ireland with the highest quality of vinyl printing Our Mudflaps come complete with fitting screws and are ready to be screwed straight onto the car. These are not factory Volkswagen Mud Flaps and are not moulded mudflaps LK Auto Factors design, brand and manufacture all of our mudflaps and we have over 30 years experience in the motor trade between us. Allowing us to get you the right products at the right price Fitment instructions: . Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. First thing to do when fitting is line the mud flaps to the edge of bumper. If you need to bore guide holes for screws you will need to do this now. Now screw into place and make sure they line up correctly and job is done.

NEW For Winter 6500K Cool White LED Car Headlight Bulbs H11 / H8 (Twin) CSP LED Chips Our new LED Collection implements specially selected diodes and OSRAM Opto Semiconductors which allows each bulb to achieve a striking light output up to 300% brighter than standard, with a highly stylish colour temperature of up to 6500K. This high Kelvin rating offers a modish, cool white light colour so you can drive in style in addition its massive light output allows for added safety and comfort on the road. Being up to 300% brighter than standard, our new H11 / H8 cool white light not only enhances your vision, but also heightens your visibility to other drivers, protecting you and them. Utilising a copper heat conductor and microprocessor the bulbs are able to safely dissipate heat while effectively maintaining voltage control, meaning that you can expect thousands of hours of efficiently produced, strong LED light from your bulbs. Remarkably the new H11 / H8 Led is self-regulating in terms of its power consumption, eliminating the bulbs’ risk of incompatibility with a vehicle’s electric wiring system. So you don’t have to worry about flickering lights or bulb error warnings on the dashboard – the bane of many LED upgrades. And with a simple, compact design and clear-to-follow instructions included, installation is a breeze. Features and Benefits 6500K colour temperature 12000 lumens 80w (40watt per bulb) Stylish cool white light  – close daylight colour match Up to 300% more light provided than standard Heat-management components to ensure longevity Very long lifespan Consistently diffused LED projection Easy installation – instructions included No need for additional installation of CAN bus control unit / adapter  4 CSP Led Chips 360° Super Bright Lighting Plug-N-Play (EMC-ready): - No error and flash problem (For 90% of vehicles) - Sized to perfectly fit your stock headlights and plug directly into your sockets. - EMC-ready,No Radio interference - 0.1 second 100% light-up Easy Installation: - All-in-one aluminium material and design makes it easy to install.   Plug-and-Play direct replacement in 20 mins.  PLEASE NOTE THAT IF YOU ARE UNSURE AS TO WHETHER THESE OR ANY OTHER LED BULBS WILL FIT YOUR VEHICLE PLEASE CONTACT ONE OF OUR HELPFUL STAFF ON ++353 74 9111000