All (3618)

RDX Universal Spoiler lip SAFE `N STYLE   RDX Universal Spoiler lip SAFE `N STYLE Length 250cm, can be individually cut to size Highly flexible and 3D glueable Universally usable for all vehicles (Cars, trucks, scooters, etc.) TÜV approval inclusive Can be used as a front spoiler lip at the front, side skirts at the side, rear apron at the rear and much more With already applied, high tack adhesive tape as assembling aid Great appearance and protection effect at the same time. If you hit the ground the spoiler lip protects painted bumpers / spoilers against scratches and is also sporty, great looking! Delivery content > Spoiler lip (250cm) > Adhesive Tape (already applied) > TÜV approval > Installation instruction (integrated in TÜV approval) SAFE `N STYLE article- und quality features The universal spoiler lip SAFE `N STYLE is an innovative quality product by RDX. This stylish spoiler lip is made of highly flexible PP-EPDM plastic with rubber-/flexible foam properties. The universal spoiler lip SAFE `N STYLE is user-ready, finished in black, thus there are no additional costs for painting. The spoiler lip is not suitable for painting and foliation. The installation of the the universal spoiler lip SAFE `N STYLE is extremely simple and can be made at any time without prior knowledge. The spoiler lip is highly flexible as rubber, 3D glueable and will be simply glued from below to the desired location on the vehicle. With already applied, high tack adhesive tape as assembling aid. To ensure long-lasting hold, screws, body adhesive or rivets are supplementary to install. The design of the vehicle remains unrestricted. The universal spoiler lip SAFE `N STYLE gives the vehicle a subtle and sporty appearance and protects painted bumpers / spoilers against scratches on contact with the ground. The spoiler lip builds about 1cm in depth on. How much the spoiler lip sticks out on the outside can be determined by yourself in adhering the spoiler lip less or more overlapping. The universal spoiler lip SAFE `N STYLE can be installed up to 4 cm to the outside. Of course, the spoiler can also be mounted invisibly, without standing out. In this case, the universal spoiler lip SAFE \\\\\´N STYLE is for protection of the vehicle or vehicle parts. The universal spoiler lip SAFE `N STYLE will be delivered with a TÜV approval.

Here at Lk Auto factors our focus is on your children’s safety and fun whilst using our products, thats why each and every one is tested by our team of little people under their parental control (our staff).  This includes safety harness testing, bluetooth connectivity testing, parental control testing as well as drivability across a variety of surfaces.   As a rule we generally only stock 12v models which are more robust and will not only protect your child but will also allow them to grow allowing you as the parent to receive greater value for money.  Any vehicle which does not meet the stringent demands of our team of testers will NOT be listed on our website.  However you may be able to fine them else where ! Anyway, here is the main specifications of this particular vehicle…... *BMW i8 Style, Electric Ride On Car with Excellent Quality and Comfort, 2.4 GHz Parental Remote Control Included*Two 6V 4.5AH Batteries and Two 20W Motors, Four Wheels Suspension, LED Light, Horn, Power Level Display*MP3 Music Input Interface on steering wheel, Foot Pedal Accelerator, Forward, reverse and neutral gears.Side Doors*Designed for Age: 3-8 Years Old, Max Capacity: 30 KGS, Max Speed: 5 KM/HourProduct Size: 102*68*44 CM, Net Weight: 13 KGS, part assembled, Charging Time:8~12 hours, Driving Time: about 45 minutes. Standards complied: GB6675 GB19865 EN71\EN62115 ASTM-F963

Here at LK Auto factors our focus is on your children’s safety and fun whilst using our products, thats why each and every one is tested by our team of little people under their parental control (our staff).  This includes safety harness testing, bluetooth connectivity testing, parental control testing as well as drivability across a variety of surfaces.   As a rule we generally only stock 12v models which are more robust and will not only protect your child but will also allow them to grow allowing you as the parent to receive greater value for money.  Any vehicle which does not meet the stringent demands of our team of testers will NOT be listed on our website.  However you may be able to fine them else where ! Anyway, here is the main specifications of this particular vehicle…... BMW 6 GT  licensed children ride on car, with 6V4.5AH*2 battery and  39W *2 motor, with 2.4G remote.Button start, safety belt ,Front&rear lights, Rear suspension, Two openable door, Dashboard with music, Steering wheel with music, Small improvement dashboardBMW 6 GT licensed children ride on car with below function1.with 2.4G remote 2.Button start, safety belt3.Front&rear lights4.Rear suspension5.Two openable door6.Dashboard with music7.Steering wheel with music8.Small improvement dashboard

NEW For Winter 6500K Cool White LED Car Headlight Bulbs H3 (Twin) CSP LED Chips Our new LED Collection implements specially selected diodes and OSRAM Opto Semiconductors which allows each bulb to achieve a striking light output up to 300% brighter than standard, with a highly stylish colour temperature of up to 6500K. This high Kelvin rating H3 LED offers a modish, cool white light colour so you can drive in style in addition its massive light output allows for added safety and comfort on the road. Being up to 300% brighter than standard, our new H3 cool white light not only enhances your vision, but also heightens your visibility to other drivers, protecting you and them. Utilising a copper heat conductor and microprocessor the bulbs are able to safely dissipate heat while effectively maintaining voltage control, meaning that you can expect thousands of hours of efficiently produced, strong LED light from your bulbs. Remarkably the new H3 Led is self-regulating in terms of its power consumption, eliminating the bulbs’ risk of incompatibility with a vehicle’s electric wiring system. So you don’t have to worry about flickering lights or bulb error warnings on the dashboard – the bane of many LED upgrades. And with a simple, compact design and clear-to-follow instructions included, installation is a breeze. Features and Benefits 6500K colour temperature 12000 lumens 80w (40watt per bulb) Stylish cool white light  – close daylight colour match Up to 300% more light provided than standard Heat-management components to ensure longevity Very long lifespan Consistently diffused LED projection Easy installation – instructions included No need for additional installation of CAN bus control unit / adapter  4 CSP Led Chips 360° Super Bright Lighting Plug-N-Play (EMC-ready): - No error and flash problem (For 90% of vehicle) - Sized to perfectly fit your stock headlights and plug directly into your sockets. - EMC-ready,No Radio interference - 0.1 second 100% light-up Easy Installation: - All-in-one aluminium material and design makes it easy to install.   Plug-and-Play direct replacement in 20 mins.  PLEASE NOTE THAT IF YOU ARE UNSURE AS TO WHETHER THESE OR ANY OTHER LED BULBS WILL FIT YOUR VEHICLE PLEASE CONTACT ONE OF OUR HELPFUL STAFF ON ++353 74 9111000

RDX Universal Roof Spoiler Rear Wing Made from PUR-IHS plastic, overall width 110cm, new, unpainted, including installation accessories and instruction, TÜV approval. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW T6 & T6.1 "Edition" Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All modelsArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Front Spoiler VW Touran 2007+Made from GFK plastic, new, unpainted, including installation accessories, aluminium mesh and instruction, TÜV approval. Fits all modelsABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW Jetta 6 2010+ "Edition" Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All modelsArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Front Spoiler VARIO-X VW Jetta 6 2010+ Front Lip Splitter VARIO-X by RDX:> Innovative 3-part front spoiler> Original equipment material: polyurethane plastic (PUR)> Quality product, Made in Germany> Simple screw mounting without glueing> Screw connection only from below in the non-visible area, enabling disassembly (e.g. in winter) at any time and within minutesDelivery content:> Front Spoiler VARIO-X> TUV Approval ABE> Mounting Kit> Mounting Instructions VARIO-X article and quality characteristics:The VARIO-X is an innovative quality product from RDX, Made in Germany! This beautifully designed front spoiler is made of high-quality polyurethane plastic. This material is also used for the original equipment and is extremely break-proof. The VARIO-X comes supplied unpainted in black and has a cleanly finished paint-friendly surface. The VARIO-X is made up of a middle section and two side parts, making it 3 parts. Delivered as one part and therefore ready for mounting. The 3-part production allows, among other things, individual paintwork to be done very easily. The VARIO-X can be screwed apart in a few seconds. The sides of the VARIO-X can, for example, be painted in the vehicle colour and the center part in contrasting colour. The mounting of the VARIO-X front spoiler is extremely simple and can be done yourself at any time, even without any expertise prior. The VARIO-X front spoiler is simply screwed onto the existing bumper from underneath, using the supplied mounting kit. Accordingly, it can also be dismantled as required, for example in winter, since the screw connection is made only from below, i.e. in the non-visible area. The design of the bumper itself remains unchanged. The VARIO-X additionally, gives the bumper or the entire vehicle a sporty, dynamic and the look of a lower profile. The height of the VARIO-X front spoiler is 4 cm. During installation, spacer sleeves can be inserted between the VARIO-X and the bumper to adjust the depth. Various spacers are included. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW Golf 4 / Bora "Edition" Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All modelsArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW Golf 4 / Bora "Edition" Delivery content:> Sideskirt set (left and right)> Installation accessories> TÜV approvalFit for:> All modelsArticle and quality characteristics:> Good fitment and easy installation> Made of high-quality ABS plastic> Unpainted in black, has a cleanly finished paint-friendly surface> Recommendation: The integrated lower lip can be painted in contrast color or car color. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Bonnet extension VW Bora Made from metal 1-piece with TÜV approval. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Roof Spoiler VW Golf 7 "Design 2"Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all modelsABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Sideskirts VW Golf 7 "Turbo" Made from ABS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.

RDX Roof Spoiler VW Golf 6 (big version) Made from PUR-IHS plastic, new, unpainted, including installation accessories and instruction, TÜV approval. Fits all models, excepting GTI/GTD ABS Plastic with Gloss Black / Carbon Finish:Our Gloss Black finish is applied to ABS Plastic parts, during the vacuum forming process. Once the process is completed, the finish becomes an integral part of the moulding. Products finished in this way can be used in much the same way as ABS Plastic products. The advantage with a factory Carbon or Gloss Black finish, is that they are ready to use as they are, so saving on expensive body shop costs. Carbon or Gloss Black finish products can also be part painted as you wish.About Our Body KitsLK Auto Factors working alongside RDX Race Design in Germany is an international manufacturer in the tuning industry and continues to expand its global sales network every year. To a great extent, RDX owes this development to the great dedication of its employees, its business partners around the world and ultimately you as a customer for your trust.The research, development and design of new products, the model construction, the tool production and finally the series production of the ABS parts takes place within the RDX factory in Germany. The design team consists of the sales team that brings in ideas and workshop team that assesses the practicalityRDX Race Design source the highest quality raw materials for their range of styling products. Modelling and tooling is carried out by experienced specialists from the RDX workshop. In addition, all production moulds for the thermo-forming process and milling tools are made in house by RDX.*  Please do ask one of the team at LK Auto Factors if you have any doubts as to which styling part will fit your vehicle.  Due to cross over years in car manufacturing by providing us with your vehicle registration we will be sure to advise you.